Loading
  • LW225E
  • LW100B
  • lw 280e
  • lw 280ES
  • lw 280ES

1 Pages -   1   

The LW 230 ES is ideal for dive shops, diving clubs and diving schools, as well as medium-sized breathing air filling station. The three-stage compressor is sound insulated and operates at low speed. It is also suitable for continuous operation. It offers long service intervals, low maintenance costs and, through the oversized industrial components maximum reliability. It comes fully wired with star/delta start cycle. Available in 2 versions: - 232 BAR with 3 Phase E-motor 400V / 50Hz - 300 BAR with 3 Phase E-motor 400V / 50Hz You can select your version at "Select item". Specifications: - Electro motor (E-Motor / 400V / 3 Phase / 50 Hz) - Painted steel housing (RAL 6026) - Sound insulated housing - Automatic condensate drain - Automatic stop at final pressure - Hour counter - Operating panel with start/stop and condensate test button, as well emergency stop switch - 2 x Filling hose c/w filling valve - Pressure maintaining and non return valve - All pistons c/w steel piston rings - Low pressure oil pump and filter - Oil- / Water separators in stainless steel - Safety valves after each stage - 3x concentric suction/pressure valves - Filling pressure to your choice (200 or 300 bar) - Connections to your choice (DIN 200 bar or 300 bar, CGA 200 bar or 300 bar and INT) - Breathing air purification an accordance to EN 12021 Technical Data: - Type: Air cooled piston compressor - Capacity [l/min] / [Nm³/h] / [cfm]: 230 / 13.8 / 8.1 - Max. Pressure [bar]: 232 - RPM [1/min]: 1080 - No of cylinders / No of stages: 3 / 3 - Prime mover type: E-Motor / 400V / 3 Phase / 50 Hz - Drive power [kW] / [HP]: 5.5 / 7.5 - Cooling air requirement [Nm³/h]: 1650 - Lubrication type: Splash oil - Oil capacity [l] / Oil pressure [bar]: 1.8 / 3.0 (+/- 0.5) - Operating temperature [°C]: +5°C to +45°C - Filter capacity [m³ at +20°C]: 900 (approx. 72 h) - Dimensions L x W x H [cm]: 76 x 103 x 163 - Weight [kg]: 330 - Noise level (measured at 1 m) [dB]: 61 Options: - Auto start system - Up to 6 additional hoses available - 200 and 300 bar parallel filling pressures - Motor protection switch - Oil pressure gauge - Intermediate pressure gauges - Oil pressure monitoring c/w auto shut down - Cylinder head temperature monitoring with auto shut down - Oil temperature display with auto shut down - Puracon filter monitoring (Auto shut down also available) - ECC control - Phase monitoring c/w shut down at wrong direction of rotation - Additional high pressure outlet - Power cable and plug - Special voltages / frequencies on request
 
The LW 280 ES is ideal for dive shops, diving clubs and diving schools, as well as medium-sized breathing air filling station. The three-stage compressor is sound insulated and operates at low speed. It is also suitable for continuous operation. It offers long service intervals, low maintenance costs and, through the oversized industrial components maximum reliability. It comes fully wired with star/delta start cycle. Available in 2 versions: - 232 BAR with 3 Phase E-motor 400V / 50Hz - 300 BAR with 3 Phase E-motor 400V / 50Hz You can select your version at "Select item". Specifications: - Electro motor (E-Motor / 400V / 3 Phase / 50 Hz) - Painted steel housing (RAL 6026) - Sound insulated housing - Automatic condensate drain - Automatic stop at final pressure - Hour counter - Operating panel with start/stop and condensate test button, as well emergency stop switch - 2 x Filling hose c/w filling valve - Motor protection switch - Pressure maintaining and non return valve - All pistons c/w steel piston rings - Low pressure oil pump and filter - Oil- / Water separators in stainless steel - Safety valves after each stage - 3x concentric suction/pressure valves - Filling pressure to your choice (200 or 300 bar) - Connections to your choice (DIN 200 bar or 300 bar, CGA 200 bar or 300 bar and INT) - Breathing air purification an accordance to EN 12021 Technical Data: - Type: Air cooled piston compressor - Capacity [l/min] / [Nm³/h] / [cfm]: 280 / 16.8 / 9.9 - Max. Pressure [bar]: 232 - RPM [1/min]: 1300 - No of cylinders / No of stages: 3 / 3 - Prime mover type: E-Motor / 400V / 3 Phase / 50 Hz - Drive power [kW] / [HP]: 7.5 / 10.0 - Cooling air requirement [Nm³/h]: 2250 - Lubrication type: Splash oil - Oil capacity [l] / Oil pressure [bar]: 1.8 / 3.0 (+/- 0.5) - Operating temperature [°C]: +5°C to +45°C - Filter capacity [m³ at +20°C]: 900 (approx. 54 h) - Dimensions L x W x H [cm]: 76 x 103 x 163 - Weight [kg]: 330 - Noise level (measured at 1 m) [dB]: 62 Options: - Auto start system - Up to 6 additional hoses available - 200 and 300 bar parallel filling pressures - Oil pressure gauge - Intermediate pressure gauges - Oil pressure monitoring c/w auto shut down - Cylinder head temperature monitoring with auto shut down - Oil temperature display with auto shut down - Puracon filter monitoring (Auto shut down also available) - ECC control - Phase monitoring c/w shut down at wrong direction of rotation - Additional high pressure outlet - Power cable and plug - Special voltages / frequencies on request
The LW 300 ES is a sound insulated and extremely slow running compressor with very low maintenance intervals and maintenance costs. It is suitable for continuous operation and ideal for use in work and public areas, as well as mixed residential and industrial buildings. It comes fully wired with star / delta connection. High reliability make this compressor the favorite of many users. Available in 2 versions: - 232 BAR with 3 Phase E-motor 400V / 50Hz - 300 BAR with 3 Phase E-motor 400V / 50Hz You can select your version at "Select item". Specifications: - Electro motor (E-Motor / 400V / 3 Phase / 50 Hz) - Painted steel housing (RAL 6026) - Sound insulated housing - Automatic condensate drain - Automatic stop at final pressure - Hour counter - Operating panel with start/stop and condensate test button, as well emergency stop switch - Motor protection switch - Safety switch - Pressure maintaining and non return valve - All pistons c/w steel piston rings - Low pressure oil pump and filter - Oil- / Water separators in stainless steel - Safety valves after each stage - 3x concentric suction/pressure valves - High pressure outlet 10L - Connections to your choice (DIN 200 bar or 300 bar, CGA 200 bar or 300 bar and INT) - Breathing air purification an accordance to EN 12021 Technical Data: - Type: Air cooled piston compressor - Capacity [l/min] / [Nm³/h] / [cfm]: 300 / 18.0 / 10.6 - Max. Pressure [bar]: 232 - RPM [1/min]: 800 - No of cylinders / No of stages: 3 / 3 - Prime mover type: E-Motor / 400V / 3 Phase / 50 Hz - Drive power [kW] / [HP]: 7.5 / 10.0 - Cooling air requirement [Nm³/h]: 2250 - Lubrication type: Oil pump + Splash oil - Oil capacity [l] / Oil pressure [bar]: 2.2 / 2.2 (+/- 0.5) - Operating temperature [°C]: +5°C to +45°C - Filter capacity [m³ at +20°C]: 1200 (approx. 67 h) - Dimensions L x W x H [cm]: 81 x 110 x 168 - Weight [kg]: 390 - Noise level (measured at 1 m) [dB]: 63 Options: - Auto start system - Up to 6 additional hoses available - 200 and 300 bar parallel filling pressures - Oil pressure gauge - Intermediate pressure gauges - Oil pressure monitoring c/w auto shut down - Cylinder head temperature monitoring with auto shut down - Oil temperature display with auto shut down - Puracon filter monitoring (Auto shut down also available) - ECC control - Phase monitoring c/w shut down at wrong direction of rotation - Additional high pressure outlet - Power cable and plug - Special voltages / frequencies on request
 
The new generation of breathing air compressors LW 300 ES II / LW 450 ES II is characterized by its robust and powerful design. The improved sound insulation is ideal for being used in commercial and sales areas, as well as in mixed residential and industrial buildings. A novel drainage system includes a 10 litre condensate collection tank as well as a highly efficient pre-separator unit which improves lifetime of the filter cartridge considerably. Innovative condensate valves limits the pressure drop during the condensation drain cycle, the efficiency is thereby improved. L&W offers highest reliability at best value for money. Specifications - Electro motor (E-Motor / 400V / 3 Phase / 50 Hz) - Painted steel housing (RAL 6026) - Sound insulated housing - Automatic condensate drain - Automatic stop at final pressure - Hour counter - Operating panel with start/stop and condensate test button, as well emergency stop switch - Motor protection switch - Safety switch - Pressure maintaining and non return valve - All pistons c/w steel piston rings - 3 x concentric suction/pressure valves - Low pressure oil pump and filter - Oil- / Water separators in stainless steel - Safety valves after each stage - NEW - High pressure pre-separator (Volume: 0.8 Litre) - NEW - Condensate-Stop-Valve - NEW - 10 Litre Condensate tank with venting silencer - NEW - Maintenance door on both sides - High pressure outlet with 1500 mm hose - Connections to your choice (DIN 200 bar or 300 bar, CGA 200 bar or 300 bar and INT) - Breathing air purification an accordance to EN 12021 Technical Data - Type: Air cooled piston compressor - Capacity [l/min] / [Nm³/h] / [cfm]: 300 / 18.0 / 10.6 - Max. Pressure [bar]: 232 - RPM [1/min]: 800 - No of cylinders / No of stages: 3 / 3 - Prime mover type: E-Motor / 400V / 3 Phase / 50 Hz - Drive power [kW] / [HP]: 7.5 / 10.0 - Cooling air requirement [Nm³/h]: 2250 - Lubrication type: Oil pump + Splash oil - Oil capacity [l] / Oil pressure [bar]: 2.2 / 2.2 (+/- 0.5) - Operating temperature [°C]: +5°C to +45°C - Filter capacity [m³ at +20°C]: 900 (at +20°C / approx. 50 h) - Dimensions L x W x H [cm]: 1250 x 990 x 1780 - Weight [kg]: 450 - Noise level (measured at 1 m) [dB]: 64 Options - Auto start system - Up to 6 additional hoses available - 200 and 300 bar parallel filling pressures - Oil pressure gauge - Intermediate pressure gauges - Oil pressure monitoring c/w auto shut down - Cylinder head temperature monitoring with auto shut down - Oil temperature display with auto shut down - Puracon filter monitoring (Auto shut down also available) - ECC control - Phase monitoring c/w shut down at wrong direction of rotation - Power cable and plug - Special voltages / frequencies on request
The LW 320 ES is ideal for dive shops, diving clubs and diving schools, as well as medium-sized breathing air filling station. The three-stage compressor is sound insulated and operates at low speed. It is also suitable for continuous operation. It offers long service intervals, low maintenance costs and, through the oversized industrial components maximum reliability. It comes fully wired with star/delta start cycle. Available in 2 versions: - 232 BAR with 3 Phase E-motor 400V / 50Hz - 300 BAR with 3 Phase E-motor 400V / 50Hz You can select your version at "Select item". Specifications - Electro motor (E-Motor / 400V / 3 Phase / 50 Hz) - Painted steel housing (RAL 6026) - Sound insulated housing - Automatic condensate drain - Automatic stop at final pressure - Hour counter - Operating panel with start/stop and condensate test button, as well emergency stop switch - Motor protection switch - Pressure maintaining and non return valve - All pistons c/w steel piston rings - Low pressure oil pump and filter - Oil- / Water separators in stainless steel - Safety valves after each stage - 3x concentric suction/pressure valves - Filling pressure to your choice (200 or 300 bar) - Connections to your choice (DIN 200 bar or 300 bar, CGA 200 bar or 300 bar and INT) - Breathing air purification an accordance to EN 12021 Technical Data: - Type: Air cooled piston compressor - Capacity [l/min] / [Nm³/h] / [cfm]: 320 / 19.2 / 11.3 - Max. Pressure [bar]: 350 (set at the final stage safety valve) - RPM [1/min]: 1450 - No of cylinders / No of stages: 3 / 3 - Prime mover type: E-Motor / 400V / 3 Phase / 50 Hz - Drive power [kW] / [HP]: 7.5 / 10.0 - Cooling air requirement [Nm³/h]: 2250 - Lubrication type: Splash oil - Oil capacity [l] / Oil pressure [bar]: 1.8 / 3.0 (+/- 0.5) - Operating temperature [°C]: +5°C to +45°C - Filter capacity [m³ at +20°C]: 900 (approx. 46 h) - Dimensions L x W x H [cm]: 76 x 103 x 163 - Weight [kg]: 330 - Noise level (measured at 1 m) [dB]: 62 Options * Auto start system * Up to 6 additional hoses available * 200 and 300 bar parallel filling pressures * Oil pressure gauge * Intermediate pressure gauges * Oil pressure monitoring c/w auto shut down * Cylinder head temperature monitoring with auto shut down * Oil temperature display with auto shut down * Puracon filter monitoring (Auto shut down also available) * ECC control * Phase monitoring c/w shut down at wrong direction of rotation * Additional high pressure outlet * Power cable and plug * Special voltages / frequencies on request
 
The LW 450 ES is a sound insulated and extremely slow running compressor with very low maintenance intervals and maintenance costs. It is suitable for continuous operation and ideal for use in work and public areas, as well as mixed residential and industrial buildings. It comes fully wired with star / delta connection. High reliability make this compressor the favorite of many users. Available in 2 versions: - 232 BAR with 3 Phase E-motor 400V / 50Hz - 300 BAR with 3 Phase E-motor 400V / 50Hz You can select your version at "Select item". Specifications: - Electro motor (E-Motor / 400V / 3 Phase / 50 Hz) - Painted steel housing (RAL 6026) - Sound insulated housing - Automatic condensate drain - Automatic stop at final pressure - Hour counter - Operating panel with start/stop and condensate test button, as well emergency stop switch - Motor protection switch - Safety switch - Pressure maintaining and non return valve - All pistons c/w steel piston rings - Low pressure oil pump and filter - Oil- / Water separators in stainless steel - Safety valves after each stage - 3x concentric suction/pressure valves - High pressure outlet 10L - Connections to your choice (DIN 200 bar or 300 bar, CGA 200 bar or 300 bar and INT) - Breathing air purification an accordance to EN 12021 Technical Data: - Type: Air cooled piston compressor - Capacity [l/min] / [Nm³/h] / [cfm]: 450 / 27.0 / 15.9 - Max. Pressure [bar]: 232 - RPM [1/min]: 1100 - No of cylinders / No of stages: 3 / 3 - Prime mover type: E-Motor / 400V / 3 Phase / 50 Hz - Drive power [kW] / [HP]: 11.0 / 15.0 - Cooling air requirement [Nm³/h]: 3300 - Lubrication type: Oil pump + Splash oil - Oil capacity [l] / Oil pressure [bar]: 2.2 / 2.2 (+/- 0.5) - Operating temperature [°C]: +5°C to +45°C - Filter capacity [m³ at +20°C]: 1200 (approx. 44 h) - Dimensions L x W x H [cm]: 81 x 110 x 168 - Weight [kg]: 390 - Noise level (measured at 1 m) [dB]: 64 Options: - Auto start system - Up to 6 additional hoses available - 200 and 300 bar parallel filling pressures - Oil pressure gauge - Intermediate pressure gauges - Oil pressure monitoring c/w auto shut down - Cylinder head temperature monitoring with auto shut down - Oil temperature display with auto shut down - Puracon filter monitoring (Auto shut down also available) - ECC control - Phase monitoring c/w shut down at wrong direction of rotation - Additional high pressure outlet - Power cable and plug - Special voltages / frequencies on request
The new generation of breathing air compressors LW 300 ES II / LW 450 ES II is characterized by its robust and powerful design. The improved sound insulation is ideal for being used in commercial and sales areas, as well as in mixed residential and industrial buildings. A novel drainage system includes a 10 litre condensate collection tank as well as a highly efficient pre-separator unit which improves lifetime of the filter cartridge considerably. Innovative condensate valves limits the pressure drop during the condensation drain cycle, the efficiency is thereby improved. L&W offers highest reliability at best value for money. Specifications - Electro motor (E-Motor / 400V / 3 Phase / 50 Hz) - Painted steel housing (RAL 6026) - Sound insulated housing - Automatic condensate drain - Automatic stop at final pressure - Hour counter - Operating panel with start/stop and condensate test button, as well emergency stop switch - Motor protection switch - Safety switch - Pressure maintaining and non return valve - All pistons c/w steel piston rings - 3 x concentric suction/pressure valves - Low pressure oil pump and filter - Oil- / Water separators in stainless steel - Safety valves after each stage - NEW - High pressure pre-separator (Volume: 0.8 Litre) - NEW - Condensate-Stop-Valve - NEW - 10 Litre Condensate tank with venting silencer - NEW - Maintenance door on both sides - High pressure outlet with 1500 mm hose - Connections to your choice (DIN 200 bar or 300 bar, CGA 200 bar or 300 bar and INT) - Breathing air purification an accordance to EN 12021 Technical Data: - Type: Air cooled piston compressor - Capacity [l/min] / [Nm³/h] / [cfm]: 450 / 27.0 / 15.9 - Max. Pressure [bar]: 232 - RPM [1/min]: 1100 - No of cylinders / No of stages: 3 / 3 - Prime mover type: E-Motor / 400V / 3 Phase / 50 Hz - Drive power [kW] / [HP]: 11.0 / 15.0 - Cooling air requirement [Nm³/h]: 3300 - Lubrication type: Oil pump + Splash oil - Oil capacity [l] / Oil pressure [bar]: 2.2 / 2.2 (+/- 0.5) - Operating temperature [°C]: +5°C to +45°C - Filter capacity [m³ at +20°C]: 900 (at +20°C / approx. 33 h) - Dimensions L x W x H [cm]: 1250 x 990 x 1780 - Weight [kg]: 450 - Noise level (measured at 1 m) [dB]: 64 Options - Auto start system - Up to 6 additional hoses available - 200 and 300 bar parallel filling pressures - Oil pressure gauge - Intermediate pressure gauges - Oil pressure monitoring c/w auto shut down - Cylinder head temperature monitoring with auto shut down - Oil temperature display with auto shut down - Puracon filter monitoring (Auto shut down also available) - ECC control - Phase monitoring c/w shut down at wrong direction of rotation - Power cable and plug - Special voltages / frequencies on request
 
The sound insulated LW 570 ES is a very slow running compressor with very low maintenance intervals and maintenance costs. It is suitable for continuous operation and comes fully wired with star / delta connection. The 4-stage compressor block is very reliable and is used for large and professional applications. It allows a max. pressure of 420 bar (as an option). Available in 2 versions: - 232 BAR with 3 Phase E-motor 400V / 50Hz - 300 BAR with 3 Phase E-motor 400V / 50Hz You can select your version at "Select item". Specifications: - Electro motor (E-Motor / 400V / 3 Phase / 50 Hz) - Painted steel housing (RAL 6026) - Sound insulated housing - Automatic condensate drain - Automatic stop at final pressure - Hour counter - Operating panel with start/stop and condensate test button, as well emergency stop switch - Motor protection switch - Safety switch - Maintenance doors on both sides - Pressure maintaining and non return valve - All pistons c/w steel piston rings - Low pressure oil pump and filter - Oil- / Water separators in stainless steel - Safety valves after each stage - 4 concentric suction/pressure valves - High pressure outlet 10L - Connections to your choice (DIN 200 bar or 300 bar, CGA 200 bar or 300 bar and INT) - Breathing air purification an accordance to EN 12021 Technical Data: - Type: Air cooled piston compressor - Capacity [l/min] / [Nm³/h] / [cfm]: 570 / 34.0 / 20.1 - Max. Pressure [bar]: 232 - RPM [1/min]: 1100 - No of cylinders / No of stages: 4 / 4 - Prime mover type: E-Motor / 400V / 3 Phasen / 50 Hz - Drive power [kW] / [HP]: 15.0 / 20.0 - Cooling air requirement [Nm³/h]: 4500 - Lubrication type: Oil pump + Splash oil - Oil capacity [l] / Oil pressure [bar]: 2.5 / 2.2 (+/- 0.5) - Operating temperature [°C]: +5°C to +45°C - Filter capacity [m³ at +20°C]: 1200 (approx. 35 h) - Dimensions L x W x H [cm]: 81 x 110 x 168 - Weight [kg]: 505 - Noise level (measured at 1 m) [dB]: 64 Options: - Auto start system - Up to 6 additional hoses available - 200 and 300 bar parallel filling pressures - Oil pressure gauge - Intermediate pressure gauges - Oil pressure monitoring c/w auto shut down - Cylinder head temperature monitoring with auto shut down - Oil temperature display with auto shut down - Puracon filter monitoring (Auto shut down also available) - ECC control - Phase monitoring c/w shut down at wrong direction of rotation - Block heating device - 420 bar Version - Power cable and plug - Special voltages / frequencies on request

1 Pages -   1