1 Pages -   1   

UW CAVITATION CLEANING TECHNOLOGY 380 Patented Cavitation pistol that does not require a retro-jet, complete with Sturdy SS frame and large-diameter tyred wheels (320 MM). Features: - 4 pole oversized electric motor with thermal protection - Remote control switch and ignition switch - Special motor-pump coupling for intensive use - Professional high-performance pump with crank connecting rod system, ceramic pistons, brass head, bronze rods - Professional pressure regulator with by-pass and pressure gauge - Brass inspection suction filter - Double sight oil-level - Pressure accumulator to protect the pump-motor group - Total stop temporized - CE marked Technical Data: - Flow 21 lt/ minute and pressure adjustable from 40 to 160 bar - 7.2 kw power at rpm 1400 rpm - Weight 78 kg and dimensions 116 x 62 x 71 cm - High pressure hose - Suction pump with spiral tube, non-return valve, filter
 
Cavitation Cleaning Machine - Diesel Version This machine is driven by a powerful and reliable Yanmar 8Kw diesel engine. Preferred by professional divers for its reliability, power, fuel economy and convenience where there is no ready access to a source of electricity. This model can also power two cavitcleaner guns simultaneously. Sturdy stainless steel frame with 4 pneumatic wheels - Yanmar L100 engine (Diesel) with electric and manual starter - Safety device motor, no oil - bypass nickeled brass for marine use speed reducer - Diver and surface professional use - Ease of movement for the large pneumatic wheels - RW premium pump with 3 ceramic pistons and nickel-plated brass head for marine use - CE marked Technical data - Pump RW brass nickeled for marine use - Flow 21 LT/minute and adjustable pressure from 40 to 160 bar - Weight: 124 Kg - Dimensions: 89 x 77 x 86 cm - Engine Yanmar L100 Series with 8.0 KW power Standard equipped with: - Hose high pressure 30+15 m - Gun that does not need rear jet
Improved cavitation technique Underwater cleaning and removing substances from pillars, watersides, ships and other underwater surfaces is easily done with the CW200 cavitation gun. The cavitation process creates Nano voids in the water that implode when they hit the cleanable surface. The voids create high energetic shockwaves when they implode, which easily remove all dirt, fouling and deposits attached to the cleanable surface. A cavitation jet reaches further than conventional high-pressure cleaning and is most effective at a safe distance from the nozzle. Cavitation cleaning requires a lower water pressure and is therefore safer and more efficient. Compact cavitation cleaning gun The CW200 cavitation cleaning gun is a mobile and powerful solution for commercial divers performing under water cleaning operations. The CW200 can be used in tight spaces with its 420mm (16.5”) length and 600gram (1.3lbs) weight. The gun has light controls and can easily be used with one hand. The protection case, at the end of its lance, makes the lance tip recognizable when visibility is poor and reduces the possibility for accidents. Stepless adjustment of water pressures at the intelligent high-pressure unit make it possible to clean different surfaces, deposits and materials with the highest efficiency, and with total conservation of coatings and materials of the cleanable surfaces. The CW200 cavitation gun can be used with water pressures up to max. 130bar (1,900psi). Properties - Improved cavitation technique - Durable, salt water resistant materials - Exchangeable protection case for lance top - Integrated Swivel - CE certified - Ergonomic controls - Use with a lightweight and flexible high-pressure hose - Light and floating materials - Protected against accidental use Specifications - Maximum pressure: 130bar (1,900psi) - Maximum flow: 20ltr/ min (5.3 gal/ min) - Weight: 1100 gram (2.2lbs), 600 gram (1.3lbs) under water; - Length of lance: 200mm (8”) - Ingress protection: IP68, 100m (109yd) deep
 
Improved cavitation technique Underwater cleaning and removing substances from pillars, watersides, ships and other underwater surfaces is easily done with the CW250 retro cavitation gun. The cavitation process creates Nano voids in the water that implode when they hit the cleanable surface. The voids create high energetic shockwaves when they implode, which easily remove all dirt, fouling and deposits attached to the cleanable surface. A cavitation jet reaches further than conventional high-pressure cleaning and is most effective at a safe distance from the nozzle. Cavitation cleaning requires a lower water pressure and is therefore safer and more efficient. Compact cavitation cleaning gun The CW250 cavitation-cleaning gun with retro lance is a mobile and powerful solution for commercial divers performing under water cleaning operations. The CW250 can still be used in tight spaces. The retro lance has the same power as the cavitation nozzle to keep the force of reaction neutral so the diver stays in position while operating the gun. The protection around the retro lance makes sure the diver can’t hurt himself. The CW250’s light controls can easily be operated with one hand. The protection case, at the end of its lance, makes the lance tip recognizable when visibility is poor and reduces the possibility for accidents. Stepless water pressure adjustment of the intelligent high-pressure unit make it possible to clean different surfaces, deposits and materials with the highest efficiency and total conservation of coatings and materials of the cleanable surfaces. The compact CW250 cavitation gun with retro lance can be used with water pressures up to max. 130bar (1,900psi). Properties - Improved cavitation technique - Durable, salt water resistant materials - Exchangeable protection case for lance top - Integrated Swivel - Retro lance with protection - CE certified - Meets IMCA guidelines - Ergonomic controls - Use with a lightweight and flexible high-pressure hose - Light and floating materials - Protected against accidental use Specifications - Maximum pressure: 130bar (1,900psi) - Maximum flow: 30ltr/ min (7.9 gal/ min) - Weight: 1800gram (3.9lbs), 1000 gram (2.2lbs) under water - Length of lance: 300mm (11.8”) - Length of retro lance: 300mm (11.8”) custom lengths optionally
Improved cavitation technique Underwater cleaning and removing substances from pillars, watersides, ships and other underwater surfaces is easily done with the CW350 retro cavitation gun. The cavitation process creates Nano voids in the water that implode when they hit the cleanable surface. The voids create high energetic shockwaves when they implode, which easily remove all dirt, fouling and deposits attached to the cleanable surface. A cavitation jet reaches further than conventional high-pressure cleaning and is most effective at a safe distance from the nozzle. Cavitation cleaning requires a lower water pressure and is therefore safer and more efficient. Compact cavitation cleaning gun The CW350 heavy cavitation cleaning gun with retro lance is designed for safe working and meets special safety guidelines for heavy underwater cleaning operations. The CW350 Retro cavitation gun makes heavy high-pressure cleaning a light and efficient operation. The retro lance has the same power as the cavitation nozzle to keep the force of reaction neutral so the diver stays in position while operating the gun. The retro lance releases its pressure behind the diver for optimal comfort and safety. The protection case, at the end of its lance, makes the lance tip recognizable when visibility is poor and reduces the possibility for accidents. Different spacers can be mounted at the protection case to keep it positioned at the most efficient distance to the material for maximum results. Stepless adjustment of water pressures at the intelligent high-pressure unit make it possible to clean different surfaces, deposits and materials with the highest efficiency, and with the total conservation of coatings and materials of the cleanable surfaces. The CW350 cavitation gun for heavy cleaning can be used with water pressures up to max. 300bar (4,350psi). Properties - Improved cavitation technique - Durable, salt water resistant materials - Exchangeable protection case with spacer for lance top - Retro lance with protection - Integrated Swivel - SIR certified - Meets IMCA guidelines - Ergonomic controls - Use with a lightweight and flexible high-pressure hose - Light and floating materials - Protected against accidental use Specifications - Maximum pressure: 300bar (4,350psi) - Maximum flow: 80ltr/ min (21.1 gal/ min) - Weight: 2300 gram (5lbs), 1200 gram (2.6lbs) under water; - Length of lance: 750mm (29.5”) - Length of retro lance: 700mm (27.5”) custom lengths optionally
 

1 Pages -   1