Loading
  • CH 18
  • BR 45
  • AK 46
  • Stanley CS06

2 Pages -   1 2 » 

Drill hydraulic This hydraulic drill is safely operated with both hands. - MT 3 shank - 280 rpm free speed - 1,6 kW power - 60 Nm torque - 22,2 / M14 tool holder - 10-45 l/min oil flow - 85,2 dB(A) noise level - 15,8 m/s2 vibration level (in medium hard concrete) - M18 x 1,5 connection - 8,5 kg
 
HD13 is a professional middle weight hammer drill for concrete, masonry and natural stones. Powerful and light, its use is ideal in all drilling works where are needed high performances and manuvrability. The hydraulic functioning assures power, long operative life, low noise , low maintenance, robustness, and implicit safety as there is no possibility of electric shock hazard and all problems tipically associated with the common electric and pneumatic tools. The bit rotation can reversed allowing an easy extraction of the tool bit from the hole in any conditions. HD13 can be used underwater and in all works in presence of water and rain where electric drill cannot be used. For its characteristics the HD13 is often irreplaceable in the maintenance of gas and water networks and in the constructions in general. <b>Weight and dimenstions</b> Weight (w.o. bits): 13 Kg Height: 52 cm Length: 27 cm Width: 16 cm <b>Hydraulic characteristics</b> Flow min-max: 26-34 l/min Ideal flow: 20 l/min Max pressure: 150 bar Tolerable back pressure: max 10 bar <b>Characteristics and performances</b> Bit attachment type: SDS max Bit rotation speed: 400 rpm Percussions per minute: 2000 x min Drilling cpacity min - max: 9 - 50 mm Ideal drilling range: 19 -32 mm STD bits drilling depth: 450 mm
The Hydraulic Powered Magnetic Drill is designed and developed for the particular needs of underwater engineering specialists, this unique machine uses hydraulic power and a special mechanically switched magnet to bring the accuracy and performance of bench drills to underwater work-pieces. Capable of drilling clean, accurate holes up to 60mm diameter in metal up to 2" thick, the hydrobor uses well-proven broaching cutter technology to maximise potential drilling power and speed. Design for use with standard or Tungsten Carbide cutter. We can offer upgraded units with the capability of drilling up to 100mm diameter holes. - Hydraulic motor for underwater applications - Stainless steel construction resists corrosion - Mechanically activated permanent magnetic base - Drill chuck attachment available - Powerful and secure magnetic hold Specifications: Cutter Capacity: 12-60 mm Stroke Length: 160 mm Speed: 50 - 400 rpm Flow Range: 10 - 40 lpm Pressure: 3250 Psi max Clamping force: 550 kg Connection: HTMA Flat Face Connectors Length: 330 mm Width: 230 mm Height: 580 mm Weight: 21 kg
 
Weight without back handle 8 kg Weight with back handle 9,5 kg Length 40 cm Width 9 cm Height 32 cm Distance from spindle center to the wall 4,5 cm Hydraulic characteristics Flow 20 - 30 l/min Pressure 105 - 170 bar Drilling performances Bit attachment 1-1/4" standard Drilling capacity mod G 60 to 150mm Mod G 400 RPM @ 20 L/min - 600 RPM @ 30 L/min <b>For other options see "Select item"</b>
AK50 is a professional hydraulic core drill designed for holes with diameters up to 70 cm, the tool is very robust and is made with the best components and materials to assure a simple use, durability and to give the best performances. To have a wide range of speeds and drilling capacity on the tool can be installed five different size of hydraulic motors, the motors are orbital type this means zero maintenance and a long lasting use without problems. The hydraulic motors can be changed in few seconds just loosing two screws, motors are equipped with a safety pressure control valve ( relief ) that automatically cut off torsion force to the tool and to the drill rig when the bit stalls, this is a good safety feature that helps in many situation and protect tool in case it is connected to hydraulic circuits with very high pressures. AK50 is a heavy duty tool that will serve you at the best giving years of work and satisfaction. Weight: 13 kg Dimension: 54 x 22 cm Bit attachment: 1 - 1.1/4" int 1/2" BSP Drilling capacity min/max 50 / 700 mm Speed (RPM) 90 - 760 Flow: 30 - 38 l/min Pressure: 120 - 200 Bar Motor: 4,5 / 7 Kw Their are 5 types of motors which you can select (you need to order these seperatly, please see the options with this product): 50 cc, at 30 l/min: 600 rpm (Ø 70 - 120 hole) at 38 l/min: 760 rpm (Ø 50 - 100 hole) 100 cc, at 30 l/min: 300 rpm (Ø 130 - 250 hole) at 38 l/min: 380 rpm (Ø 130 - 180 hole) 160 cc, at 30 l/min: 180 rpm (Ø 300 - 360 hole) at 38 l/min: 220 rpm (Ø 250 - 310 hole) 200 cc, at 30 l/min: 150 rpm (Ø 400 - 600 hole) at 38 l/min: 190 rpm (Ø 250 - 400 hole) 315 cc, at 30 l/min: 90 rpm (Ø 500 - 700 hole) at 38 l/min: 120 rpm (Ø 450 - 600 hole)
 
HD 28 HYDRAULIC HAMMER DRILL Drilling up to 28 mm in concrete. Impact mechanism can be switched on and off. Usable as well under water. - SDS-plus shank - 500 RPM free speed - 4460 rpm blows per minute - 1,2 KW power - 28mm drilling capacity concrete - 50mm drilling capacity masonry - Oil flow 15-45 l/min (Max. Input pressure 80 bar) - 460mm Length incl. drill chuck - 3/4" - 16UNF connection - 92 dB(A) noise level - 4,5 m/s2 vibration level - 8,2 kg weight - 1/2" FF -Flat-Face coupling (hydraulic hose coupling) - ISO 16028 - 1/2"BSP/BG2
HD 50 HYDRAULIC HAMMER DRILL Drilling up to 50 mm in concrete. Impact mechanism can be switched on and off. Usable as well under water. - SDS-max shank underwater design - 270 RPM free speed - 2300 rpm blows per minute - 1,2 KW power - 50mm drilling capacity concrete - 80mm drilling capacity masonry - Oil flow 15-45 l/min (oper. pressure 80 bar) - 640mm Length incl. drill chuck - 3/4"-16 UNF connection - 92 dB(A) noise level - 9 m/s2 vibration level - 14 kg weight - 1/2" FF -Flat-Face coupling (Hydraulic hose coupling) - ISO 16028 - 1/2"BSP/BG2
 
DL-07 HYDRAULIC DRILL - Chuck capacity 1/2" / 12mm - Flow range 3-10 gpm / 11,3 - 38 lpm - Working pressure 1000 - 2000 psi / 70 - 140 bar - Full relief setting 2250 psi / 155 bar - Weight 7,8 lbs / 3,5 kg - Length 10 1/2" / 26,7 cm - Hydraulic ports - 8 SAE O-ring - Couplers No - Hose whips Yes (3/8" NPT Male thread) * CE approved DL07 Speed/Hydraulic flow - 350 rpm @ 3 gpm / 11,3 lpm - 475 rpm @ 4 gpm / 15 lpm - 750 rpm @ 6 gpm / 23 lpm - 1000 rpm @ 8 gpm / 30 lpm - 1250 rpm @ 10 gpm / 38 lpm DL07 Torque at PSI/Bar - 4 ft lbs @ 500 psi / 0,5 Nm @ 35 bar - 9 ft lbs @ 1000 psi / 1.2 Nm @ 70 bar - 14 ft lbs @ 1500 psi / 1.9 Nm @ 105 bar - 19 ft lbs @ 2000 psi / 2.6 Nm @ 140 bar

2 Pages -   1 2 »