Loading
  • TP08 Trash Pump
  • SP 20 Trash Pump

2 Pages -   1 2 » 

WP 25 is a professional water pump with hydraulic motor designed for pumping clear and muddy water with suspended solids with dimensions up to mm 20. The hydraulic functioning assures: HIGH POWER, SAFETY, RESISTANCE TO ABRASIVE LIQUIDS, POSSIBILITY TO RUN DRY, ROBUSTNESS AND LONG OPERATIVE LIFE. The performances are very high: flow up to 1.600 L/min with water head up to 45 meters. Thanks to its characteristics WP 25 is ideal in the professional use, in the maintenance of utility networks, in large dewatering intervents, in the civil protection, in road maintenance works. Extremely robust and reliablecan be powered from small hydraulic power packs or from the hydraulic circuits of earth moving machines, trucks, tractors etc. Outlet mouth: 2,5" BSP female Dimensions: 30 cm x H 30 cm Weight: 9,5 kg Flow: 1600 L/min (96 Cubic mxh) Water head max: 45 meter Pumpable solids dimension: 2 cm Impeller type: Centrifugal open impeller Impeller material: Chromium cast iron Volute material: Hard aluminum alloy Hydraulic motor type: Gear type group 2 Oil flow: 15 - 38 l/min Ideal flow: 30 l/min Oil pressure: 100 - 210 bar Back pressure tolerable: 17 Bar max Quick couplers type: 1/2" BSP flush face
 
SP 20 is a compact and powerful trash pump with flow capacity up to 800 L/min and water heads up to 35 meters (water pressure 3,5 bar) The tool that can pump solid objects with dimension up to 3 cm and pump also thick and muddy liquids. Thanks to its robustness and the construction quality SP20 represents the state of the art in its type, the pump body is in hard stainless steel and the impeller is in chromium cast iron, materials that assure high resistance to impacts and abrasivity. Another important advantage are the small dimension and weight, SP20 is extremely small, the side dimension of only 22 cm allow the insertion of the pump into the smallest manholes or trenches. Compact, reliable and safe the SP20 is ideal used in the maintenance of utilities networks and in the urban maintenance in general. Outlet mouth: 2" BSP female Dimensions: 22 cm x H 30 cm Weight: 8 kg Flow: 800 L/min (48 Cubic mxh) Water head max: 35 meter Pumpable solids dimension: 3 cm Impeller type: Centrifugal open impeller Impeller material: Chromium cast iron Volute material: Stainless steel - INOX Hydraulic motor type: Gear type group 2 Oil flow: 15 - 30 l/min Ideal flow: 20 l/min Oil pressure: 100 - 210 bar Back pressure tolerable: 17 Bar max
SP35 is a modern 3” submersible trash water pump with impeller and body in stainless steel. The exclusive monocanal closed impeller and the hydraulic functioning give very high efficiency: flows up to 1900 L/min, water head up to 40 mt and possibility to pump loaded fluids with suspended solids up to 50mm size. Can pump very abrasive fluids and “bentonite”. The pump is available on request with hydraulic motor in cast iron and ATEX Certification for pumping flammable liquids or for uses in mines or explosive ambients. The possible applications are many thanks to the versatility and performancies, can be powered by the hydraulic circuit of power packs, trucks, mini excavators, boats, fire fighting trucks and various working machinery. Outlet mouth: 3" BSP female Dimensions: 35 cm x H 37 cm Weight: 17 kg Flow: 1900 L/min (114 Cubic mxh) Water head max: 35 meter Pumpable solids dimension: 5 cm Impeller type: Mono canal closed impeller Impeller material: Stainless steel - INOX Volute material: Stainless steel - INOX Hydraulic motor type: Gear type group 2 Oil flow: 15-38 l/min Ideal flow: 30 l/min Oil pressure: 100 - 210 bar Back pressure tolerable: 17 Bar max
 
SP 45 is a professional trash pump designed for pumping slurries, trash waters and thick liquids with density concentration in the fluid up to 25% and suspended solids with dimensions up 70 mm. Can be powered by power packs or by the hydraulic circuits of excavators, back hoe loaders, trucks, tractors, and all machines equipped with a sufficient circuit.. THE PUMP BODY IS FABRICATED IN STAINLESS STEEL WITH URETHANE WEAR PLATES, materials that assure hardness, resistance to abrasivity,impacts and rust. The hydraulic functioning assure intrinsic safety and impossibility to cause electric shock. The performances are very high: flow up to 3000 L/min and water head up to 16 m. SP 45 is ideal in large movements of water, in the emergencies after floods, in military works, for sewage treatment facilities, manhole dewatering. Outlet mouth: 4" BSP female Dimensions: 40 cm x H 50 cm Weight: 28 kg Flow: 3000 L/min (180 Cubic mxh) Water head max: 16 meter Pumpable solids dimension: 7 cm Impeller type: Centrifugal open impeller Impeller material: Chromium cast iron - Ghisa al cromo Volute material: Stainless steel - INOX Hydraulic motor type: Gear type group 2 Oil flow: 30-45 l/min Ideal flow: 38 l/min Oil pressure: 140 - 210 bar Back pressure tolerable: 17 Bar max Quick couplers type: 1/2" Flush Face
SP55 is a high performance trash pump with discharge mouth 5,5” ideal in large dewatering works, in the rental activity, as “well point” pump, in the civil protection and military sector, in the sewage treatment plants and in all intervents where is necessary to move quickly large volumes of water and heavy loaded fluids. Maximum flow is 5500 L/min (330 m/cub x h) with water head up to 29 metres. The main characteristics are the high power and the impeller that has knives and can cut suspended solids like sea weeds, strow, rags, ropes, sediments and various linear fibers. The hydraulic functioning gives a long series of operatinal and performance advantages not obtainable from traditional selfpriming pumps. Outlet mouth: 5" BSP female Dimensions: 50 cm x H 80 cm Weight: 95 kg Flow: 5500 L/min (330 Cubic mxh) Water head max: 29 meter Pumpable solids dimension: 5,5 cm Impeller type: Centrifugal open with knives Impeller material: High resistance structural steel Volute material: Cast iron spheroidal Hydraulic motor type: Piston type Oil flow: 60 - 100 l/min Oil pressure: 150 - 350 bar Back pressure tolerable: 17 Bar max Quick couplers type: 3/4 BSP flush face
 
SP65 is a high performance 6” trash pump ideal in large dewatering works, in the rental activity, as “well point” pump, in the civil protection and military sector, in the sewage treatment plants and in all intervents where is necessary to move quickly large volumes of water and heavy loaded fluids. Maximum flow is 8000 L/min (480 m/cub x h) with water head up to 39 metres. The main characteristics are the high power and the impeller that has knives and can cut suspended solids like sea weeds, strow, rags, ropes, sediments and various linear fibers. The hydraulic functioning gives a long series of operatinal and performance advantages not obtainable from traditional selfpriming pumps. Outlet mouth: 6" BSP female Dimensions: 55 cm x H 90 cm Weight: 135 kg Flow: 8000 L/min (480 Cubic mxh) Water head max: 39 meter Pumpable solids dimension: 6,5 cm Impeller type: Centrifugal open with knives Impeller material: High resistance structural steel Volute material: Cast iron spheroidal Hydraulic motor type: Piston type Oil flow: 60 - 100 l/min Oil pressure: 150 - 350 bar Back pressure tolerable: 17 Bar max Quick couplers type: 3/4 BSP flush face
SG4 is a accessory for trash pumps models SP45 - SP55 – SP65. The accessory is a set formed by: - SG4 body and cylinder, this element to be installed on the pump outlet mouth. - Hydraulic control valve and hoses that can control the opening/closing action of the gate. SG4 transforms the pumps in “mixers” to allows to shake and reduce to a more fluid state liquids that can be thick, loaded and viscous like those that can be found in waste water treatment plants, anaerobic digesters, API separators, petrochemical plants and refineries, environmental operations, and for moving all liquids not easy to pump. The SG4 is a "retrofit accessory" that can be installed on pumps after the purchase, its action as mixer is necessary when the liquid to pump is very thick and have suspended solids (like sediments, mud balls or oil balls or other agglomerate of semi solid/ pasty liquids) the "balls" must be disintegrated to become more fluid and be pumped, the balls neutralisation is needed also to avoid that may choke the pump inlet. After some minutes of this treatment the liquid can be pumped better and the pump will be used in its natural function. Technical characteristics: Fluid passage: equals to 6" Total height: 370 mm Weight: 12 kg Cylinder type: double effect Control valve: 3 position open centre
 
Version 1: WATER PUMP, 12 VDC, DC PLUG, MARINE TYPE Voltage Requirement 12 vdc Current 9.5 amps Maximum Water Flow 3.3 gpm (12.5 lpm) Maximum Water Pressure 40 psi (2.8 bar) Cut-Out Pressure 45 psi (3.1 bar) Cut-In Pressure 30 psi (2.1 bar) Weight 12.6 lbs (5.7 kg) Length 12.5 in (318 mm) Width 11 in (279 mm) Height 15 in (381 mm) <b>For other options see "Select item"</b>

2 Pages -   1 2 »