Loading
  • amcom I
  • Amcom III

1 Pages -   1   

Two channel chamber communications set is a simplex communications set for use with twin lock chambers. The system consists of a master station fitted outside the chamber and a speaker/microphone fitted in each lock. The units are interconnected with two core cable that passes through the pressure boundary of the chamber. The master unit is supplied with a fist microphone fitted with a press to talk switch. A channel selector switch allows the selection of main lock, entry lock or both. The master unit listens to the chamber until the press to talk switch is pressed. A headset with boom microphone and press to talk switch is available as an option. Separate send and receive volume controls are fitted, neither volume control can be turned totally “off”. A recording outlet allows the conversation with the chamber occupant to be recorded if required. The master unit is powered from an internal 12 Volt rechargeable battery, a separate charger is supplied; the charger can be left permanently connected to the battery. The battery then acts as a reserve power supply in the event of mains failure. Battery autonomy is about 24 hours depending on talk time and background noise. <b>Technical specifications</b> Weights: master unit 1.5Kg; slave 250 grams; charger 600 grams. Power supply; 12 Volts DC rechargeable battery Charger: 230 VAC input; output voltage and current limited Audio output: 5 watts intermittent
 
The Amcom II Double Lock Chamber Communication system is a full feature hard wire, two lock communicator system. Features: Two Modes of Operation - 2-Wire Mode and/or 4-Wire Mode Separate volume controls for operator and each lock Separate on/off controls for each lock External 12 VDC connection Entertainment Model 2820A-4003E has an amplifier to provide audio from any source, such as AM, FM, CD, TV, etc Separate volume control for the entertainment channel Entertainment audio is interrupted when the Hand-Held Push-to-Talk Microphone or Push-to-Talk switch is activated Double Lock Chamber Communicator: Part Number 2820A-4003 Includes Hand-Held Push-to-Talk Microphone: Part Number 2405-28 (1) 12 VDC Slide Terminal Gel-Cell Rechargeable Battery: Part Number 2890-05 - Expected life: 15 hrs (1) MS Connector – 14 Pin Female: Part Number MS-3106A-20-27S (1) MS Cable Clamp 20/22 Shell: Part Number MS-3057-12A Power Cord: Part Number P-2392 User Manual Specifications Power: 115/230 VAC, 50-60Hz Back-up Power: Rechargeable 12 VDC Slide Terminal Gel Cell Rear Panel Connection: MS 14 Pin Male with Mating Connector Dimensions: 8 in. H x 10.125 in. W x 7.5 in. D (20.3 cm x 25.7 cm x 19.1 cm) Weight: 15 lbs (3.6 kg)
Amron International Entertainment Double Lock Chamber Communicator Features Two Modes of Operation - 2-Wire Mode and/or 4-Wire Mode Separate volume controls for operator and each lock Separate on/off controls for each lock External 12 VDC connection Entertainment Model 2820A-4003E has an amplifier to provide audio from any source, such as AM, FM, CD, TV, etc Separate volume control for the entertainment channel Entertainment audio is interrupted when the Hand-Held Push-to-Talk Microphone or Push-to-Talk switch is activated Double Lock Chamber Communicator: Part Number 2820A-4003 Includes Hand-Held Push-to-Talk Microphone: Part Number 2405-28 (1) 12 VDC Slide Terminal Gel-Cell Rechargeable Battery: Part Number 2890-05 - Expected life: 15 hrs (1) MS Connector – 14 Pin Female: Part Number MS-3106A-20-27S (1) MS Cable Clamp 20/22 Shell: Part Number MS-3057-12A Power Cord: Part Number P-2392 User Manual Specifications Power: 115/230 VAC, 50-60Hz Back-up Power: Rechargeable 12 VDC Slide Terminal Gel Cell Rear Panel Connection: MS 14 Pin Male with Mating Connector Entertainment Input: 2 RCA jacks for (2820A-4003E only) audio input. Signal is mixed internally for a stereo input/monaural output Dimensions: 8 in. H x 10.125 in. W x 7.5 in. D (20.3 cm x 25.7 cm x 19.1 cm) Weight: 15 lbs (3.6 kg)
 
The CM0120 is a panel mounted chamber communication system operating from an internal 110/220 VAC power source with an internal 12 VDC battery back up. Features Single Lock, 1-Channel Operation Panel Mount for Chamber Panel Separate Volume Controls for both Operator and Lock Two Modes of Operation, 2-Wire Mode or 4-Wire Mode Noise Canceling Microphone LED Power/Battery Status Indicator Single Lock Chamber Communicator: Part Number 2810A-2001 Includes Hand-Held Push-to-Talk Microphone: Part Number 2405-28 (1) 12 VDC Slide Terminal Gel-Cell Rechargeable Battery: Part Number 2890-05 - Expected life: 50 hrs Power Cord: Part Number P-2392 User Manual Specifications Power Supply Voltage: 100/220 VAC Nominal Output Power: 20 Watts Audio Battery Life: 50 hrs Panel: Stainless Steel Enclosure: Black Anodized Aluminum Dimensions: 6.75 in. H x 10.75 in. W x 7 in. D (17.2 cm x 27.3 cm x 17.7 cm) Weight: 11.5 lbs (5.2 kg)
Sound powered telephone - Push to operate button - Straight cord & alligator clips
 
This Sound Powered Phone works only with the energy generated by the voice. This handset range is equipped with a calling howler which delivers a perfectly audible sound even in noisy environments. The Sound Powered Phone is ATEX certified. Features - Calling howler - Drop resistant - Salt fog and mist resistant - RoHS compliant Specifications - Microphone and earphone transducers: A47421 - Cord: Reinforced polyurethane coiled 2.8 ft. / 9 ft. (0,85 m / 2,80 m) - Weight: 1.4 lbs (620 g) - Temperature range: - 40°C to +55°C - Color: black - Material: Thermoplastic

1 Pages -   1